The stainless steel PSA heat exchanger with an output of 20 kW is intended for the indirect transfer of heat between the primary circuit (heating water, solar circuit) and the pool water. Both circuits are separated from each other, so the pool water does not come into contact with the heating medium.
The d50 connections on the pool circuit side and d63 on the primary circuit ensure sufficient flow for the full transfer of the 20 kW output. The stainless steel design withstands chlorinated and salt water, while the large-surface construction achieves high heat transfer efficiency.
The exchanger is suitable for pools with a volume of approximately 30–60 m³ in combination with a gas boiler or heat pump with an output of up to 20 kW. Mounting brackets allow installation on the wall of the plant room; the connections are joined with standard fittings.
