EOVk-3 is an electric flow-through heater for heating water in pools and hot tubs. Structurally it is identical to the EOV type, but the water flow is sensed by a flow switch. You set the temperature with a thermostat, and the heating element is switched by a contactor controlled by the thermostat and a safety flow indicator.
Design and materials
- Casing made of stainless steel with titanium content AISI 316
- INCOLOY 800 heating cartridge with titanium content
- Flow sensed by a flow switch
- 100% leak tested
- 2 mounting brackets
Connection and control
- Connection via 1.5″ thread, 50 mm hose or 50 mm glued joint
- Thermostat 5 °C – 45 °C and thermal fuse
- Power output 3 kW, voltage 230 V
Operating conditions
- Minimum water flow: 4 m³/h
- Operating pressure: 0–3 bar
- Connection to a circuit with 50 mm pipe diameter
- Water quality: chlorides max. 150 mg/l, chlorine max. 1 mg/l, pH 7.0–7.8
Install downstream of a residual current device; automatic VÁGNER control is recommended. Power outputs up to 36 kW available to order.
