EOVp-18 is the most powerful plastic model in the EOVp series for heating pool water and water in other circuits. You set the temperature with a thermostat, and the heating element is switched by a contactor controlled by the thermostat and a safety flow indicator. Its plastic body and flow switch distinguish it from the EOV version.
Design and materials
- Casing made of high-quality PVC
- INCOLOY 800 heating cartridge, M1182
- Flow switch for flow monitoring
- 100% leak tested
- 2 mounting brackets
Connection and control
- Connection to the water circuit via 50 mm glued joint
- Thermostat 5 °C – 45 °C and thermal fuse
- Power output 18 kW, voltage 400 V
Operating conditions
- Minimum water flow: 4 m³/h
- Operating pressure: 0–3 bar
- Connection to a circuit with 50 mm pipe diameter
- Water quality: chlorides max. 150 mg/l, chlorine max. 1 mg/l, pH 7.0–7.8
Install downstream of a residual current device; automatic VÁGNER control is recommended.
Recenze
Zatím zde nejsou žádné recenze.