Heater EOVp-15, 15 kW, 400 V, Plastic with El. Flow Switch

EOVp-15 heats pool water as well as water in other circuits via a heating element in a plastic casing. The temperature is regulated by a thermostat, and switching of the element is provided by a contactor controlled by the thermostat and a safety flow indicator. Instead of a pressure switch, a flow switch is used.

Design and materials

• Casing made of high-quality PVC
• INCOLOY 800 heating cartridge, M1182
• Flow switch monitoring the flow
• 100% leak tested
• 2 mounting brackets

Connection and control

• Connection to the water circuit via 50 mm glued joint
• Thermostat 5 °C – 45 °C and thermal fuse
• Power output 15 kW, voltage 400 V

Operating conditions

• Minimum water flow: 4 m³/h
• Operating pressure: 0–3 bar
• Connection to a circuit with 50 mm pipe diameter
• Water quality: chlorides max. 150 mg/l, chlorine max. 1 mg/l, pH 7.0–7.8

Install the heater downstream of a residual current device; we recommend automatic VÁGNER control.