EOVp-3 is an electric flow-through heater with a plastic body, designed for heating water in pools and whirlpool tubs. You set the temperature with a control thermostat; the element is switched by a contactor controlled by the thermostat and a safety flow indicator. Unlike the EOV type, it has a plastic casing and a flow switch instead of a pressure switch.
Design and materials
- Casing made of high-quality PVC
- Heating cartridge made of stainless INCOLOY 800 material, M1182
- Flow switch monitoring water flow
- 100% leak tested
- 2 brackets for easy mounting
Connection and control
- Connection to the water circuit via 50 mm glued joint
- Thermostat 5 °C – 45 °C and thermal fuse
- Power output 3 kW, voltage 3×230 V
Operating conditions
- Minimum water flow: 4 m³/h
- Operating pressure: 0–3 bar
- Connection to a circuit with 50 mm pipe diameter
- Water quality: chlorides max. 150 mg/l, chlorine max. 1 mg/l, pH 7.0–7.8
Install the heater downstream of a residual current device; we recommend adding automatic VÁGNER control.
Recenze
Zatím zde nejsou žádné recenze.