EOV-12 is an electric flow-through heater for pools and whirlpool tubs. The water is heated as it flows through the heating element, with the temperature set by a control thermostat. Switching of the element is provided by a contactor controlled by the thermostat and a safety flow indicator.
Design and materials
- Casing made of stainless steel with titanium content AISI 316
- Heating cartridge made of INCOLOY 800 material with titanium content
- Pressure switch for flow monitoring
- 100% leak tested
- 2 mounting brackets
Connection and control
- Connection via 1.5″ thread, 50 mm hose or 50 mm glued joint
- Thermostat 5 °C – 45 °C and thermal fuse
- Power output 12 kW, voltage 400 V
Operating conditions
- Minimum water flow: 4 m³/h (with the pressure switch readjusted from 1,000 l/h)
- Operating pressure: 0–3 bar
- Connection to a circuit with 50 mm pipe diameter
- Water quality: chlorides max. 150 mg/l, chlorine max. 1 mg/l, pH 7.0–7.8
Install the heater downstream of a residual current device and add automatic VÁGNER control. Power outputs up to 36 kW available to order.
Recenze
Zatím zde nejsou žádné recenze.