EOV-6 is an electric flow-through heater designed for heating water in pools and whirlpool tubs. The water is heated as it flows through the heating element, and you set the required temperature with a control thermostat. The heating element is switched by a contactor controlled by the thermostat and a safety flow indicator.
Design and materials
- Casing made of high-quality stainless steel with titanium content AISI 316
- Heating cartridge made of stainless INCOLOY 800 material with titanium content
- Water flow monitoring by pressure switch
- 100% leak tested
- 2 brackets for easy mounting included
Connection and control
- Connection via 1.5″ thread, 50 mm hose or 50 mm glued joint
- Thermostat with range 5 °C – 45 °C and thermal fuse
- Power output 6 kW, voltage 400 V
Operating conditions
- Minimum water flow: 4 m³/h (with the pressure switch readjusted from 1,000 l/h)
- Operating pressure: 0–3 bar
- Connection to a circuit with 50 mm pipe diameter
- Water quality: chlorides max. 150 mg/l, chlorine max. 1 mg/l, pH 7.0–7.8
The heater must be installed in the electrical system downstream of a residual current device. We recommend adding suitable automatic VÁGNER control. Higher power outputs up to 36 kW can be supplied to order.
