The Balboa Water Group 45° elbow has an inner opening for gluing of 50 mm diameter on both sides. It is used to change the direction of piping in hot tubs and pools.
Installation
Before gluing, thoroughly clean all joints. Apply a thin layer of adhesive to both the elbow and the pipe, push the joints together and leave undisturbed for 5 minutes. Then you can continue with further gluing.
Technical specifications
- Angle: 45°
- Joint type: gluing / gluing
- Inner diameter of inlets: 50 mm
- Manufacturer: Balboa Water Group
Recenze
Zatím zde nejsou žádné recenze.