The Balboa Water Group 90° elbow has a 50 mm diameter inner socket for gluing on both sides. It is used to change the direction of piping in hot tubs and pools.
Installation
Before gluing, all joints must be thoroughly cleaned. Apply a thin layer of adhesive to both the elbow and the pipe, push the joints together and leave them undisturbed for 5 minutes. You can then continue with the remaining gluing.
Technical parameters
- Angle: 90°
- Joint type: glue / glue
- Inner diameter of inlets: 50 mm
- Manufacturer: Balboa Water Group
Recenze
Zatím zde nejsou žádné recenze.