Free shipping over €200  ·  Dispatch within 24–48 h Mon–Fri
Categories

Jets & Outlets

Over 220 built-in parts for the pool circulation circuit – return and inlet jets, bottom and floor jets, suction jets, floor drains, wall penetrations and the associated seals, flanges and face caps. In stock from Hugo Lahme, Kripsol, Emaux, Pahlén, Hayward, MTS and VAMILA, in ABS plastic and in AISI 316 stainless steel. In-stock items ship within 48 hours, and we deliver across the EU. These are pool built-in parts. Hot tub massage jets have different diameters and fixings – you will find those in the category Jet Bodies & Faces. Within the Circulation Circuit, the jets are complemented by Skimmers & Overflows and Suction Fittings. How to choose by pool type The pool construction determines how the part is fitted. A liner pool needs jets with a flange and a seal that clamp the liner – for example the Hugo Lahme HL3103420 with an 18 mm bore, a 1 1/2″ thread and a length of 40 mm, or VA 31VAPF series jet sets with a 50 mm solvent-weld connection. Prefabricated and plastic pools use flangeless versions with a back nut (31VAPP sets, Kripsol parts for PP pools). For concrete pools, a wall penetration with brass inserts is fitted, for example the MTS 36125 in R 2″ measuring 50 × 63 × 150 mm, or a sleeve 300 mm long. Types of jets and outlets Return jets send filtered water back into the pool – in ABS as the MTS 7 × 7 mm, 9 mm, 25 mm and Duo 2 × 8 mm, or as R 1 1/2″ inlet fittings. The AISI 316 stainless steel version is listed as round d60, d80 and d90 and square 90 × 90 mm with a 1 1/2″ thread, with one or four openings, including a black finish. Bottom and floor jets are adjustable from 0–100 % (Kripsol 14 m³/h) and also available in stainless steel with a diameter of 115 mm for pipes d50 to d90. The range is completed by floor drains with an anti-vortex cover d = 168 mm and a 2″ connection, an outlet for the overflow channel 160 × 60 mm and VAMILA stainless steel suction fittings of 30 m³/h. What to watch out for The 1 1/2″ and 2″ connection threads are not interchangeable, and you also need to check the socket length (40 mm for the Hugo Lahme series). The flow rate and the number of jets must match the pump output – too few jets increase the flow velocity and noise. Colours are given in RAL: 1015 ivory, 7004 light grey, 7016 anthracite and 7037 grey, so choose any parts you add in the same shade. Seals and O-rings are consumable parts and are in stock separately (Hayward 1411, Kripsol seals for PP pools) as well as in sets with a cap, ball and key. Who the category is for For pool owners dealing with a leaking or cracked jet, and for construction and service companies fitting the circulation circuit of a new pool. The shop is run by IDOL SPAS s.r.o., a Czech hot tub manufacturer with its own service team – if you are unsure what to choose, we will advise you from practical experience. We offer service companies and resellers our wholesale programme with individual prices.

  • Brands
  • Reset

Showing 31–60 of 208 results

Over 220 built-in parts for the pool circulation circuit – return and inlet jets, bottom and floor jets, suction jets, floor drains, wall penetrations and the associated seals, flanges and face caps. In stock from Hugo Lahme, Kripsol, Emaux, Pahlén, Hayward, MTS and VAMILA, in ABS plastic and in AISI 316 stainless steel. In-stock items ship within 48 hours, and we deliver across the EU. These are pool built-in parts. Hot tub massage jets have different diameters and fixings – you will find those in the category Jet Bodies & Faces. Within the Circulation Circuit, the jets are complemented by Skimmers & Overflows and Suction Fittings. How to choose by pool type The pool construction determines how the part is fitted. A liner pool needs jets with a flange and a seal that clamp the liner – for example the Hugo Lahme HL3103420 with an 18 mm bore, a 1 1/2″ thread and a length of 40 mm, or VA 31VAPF series jet sets with a 50 mm solvent-weld connection. Prefabricated and plastic pools use flangeless versions with a back nut (31VAPP sets, Kripsol parts for PP pools). For concrete pools, a wall penetration with brass inserts is fitted, for example the MTS 36125 in R 2″ measuring 50 × 63 × 150 mm, or a sleeve 300 mm long. Types of jets and outlets Return jets send filtered water back into the pool – in ABS as the MTS 7 × 7 mm, 9 mm, 25 mm and Duo 2 × 8 mm, or as R 1 1/2″ inlet fittings. The AISI 316 stainless steel version is listed as round d60, d80 and d90 and square 90 × 90 mm with a 1 1/2″ thread, with one or four openings, including a black finish. Bottom and floor jets are adjustable from 0–100 % (Kripsol 14 m³/h) and also available in stainless steel with a diameter of 115 mm for pipes d50 to d90. The range is completed by floor drains with an anti-vortex cover d = 168 mm and a 2″ connection, an outlet for the overflow channel 160 × 60 mm and VAMILA stainless steel suction fittings of 30 m³/h. What to watch out for The 1 1/2″ and 2″ connection threads are not interchangeable, and you also need to check the socket length (40 mm for the Hugo Lahme series). The flow rate and the number of jets must match the pump output – too few jets increase the flow velocity and noise. Colours are given in RAL: 1015 ivory, 7004 light grey, 7016 anthracite and 7037 grey, so choose any parts you add in the same shade. Seals and O-rings are consumable parts and are in stock separately (Hayward 1411, Kripsol seals for PP pools) as well as in sets with a cap, ball and key. Who the category is for For pool owners dealing with a leaking or cracked jet, and for construction and service companies fitting the circulation circuit of a new pool. The shop is run by IDOL SPAS s.r.o., a Czech hot tub manufacturer with its own service team – if you are unsure what to choose, we will advise you from practical experience. We offer service companies and resellers our wholesale programme with individual prices.