Free shipping over €200  ·  Dispatch within 24–48 h Mon–Fri
Categories

Blowers & Compressors

Over 110 blowers, air compressors and related parts that drive the air massage in a hot tub - the bubble floor and air jets. In stock are LX units (AP400, AP400-V2, AP700, APR800), Balboa Genesis, CG Air, Koller X602 and X605 series, plus Balboa HydroAir control panels, reducers, connecting pipes and LVJ air manifolds. In-stock items ship within 48 hours, with shipping across the EU. How to choose the output Typical home hot tubs get by with a 400 to 700 W blower, while larger tubs and swim spas with a bubble floor across the whole surface need 900 W. Higher output does not only mean a stronger massage but also more noise and higher consumption, so it pays to stay with what the original unit had. The safest approach is to copy the type designation straight from the removed blower - LX APR800, Balboa G90-2NN-S and so on. Heated and regulated versions Some units have built-in air heating, because cold air blown into the tub cools the water; on the Koller range you can recognise this by the letter H in the designation (for example H-3605-2). Models with electronic speed control let you vary the massage intensity smoothly, while simpler versions only switch on and off. Koller also offers a version with central mounting, which fits into the cabinet frame differently from a standard unit - so check the mounting method before ordering, not just the output. What to watch out for The connection diameter must match your existing piping; the sockets are typically 1.25 inch or 48 mm, and plastic reducers and connecting pipes are also on offer. A blower is always installed above the water level of the tub so that water cannot run back into the unit when it is switched off. Wiring is reserved electrical work - switch off the circuit breaker before any intervention and have the work done by a qualified person. You will find control panels and switches in the Electrical & Cables category, and the full overview of parts in the parent category Hot Tub Spare Parts. Who this category is for Hot tub owners whose blower has worn out or whose air massage has weakened, as well as service technicians looking for a specific type including reducers and connecting pipes. The shop is run by IDOL SPAS s.r.o., a Czech hot tub manufacturer with its own service team - if you are unsure what to choose, we will advise you from experience. We offer service companies and dealers a wholesale programme with individual pricing.

  • Brands
  • Reset

Showing 121–121 of 121 results

Over 110 blowers, air compressors and related parts that drive the air massage in a hot tub - the bubble floor and air jets. In stock are LX units (AP400, AP400-V2, AP700, APR800), Balboa Genesis, CG Air, Koller X602 and X605 series, plus Balboa HydroAir control panels, reducers, connecting pipes and LVJ air manifolds. In-stock items ship within 48 hours, with shipping across the EU. How to choose the output Typical home hot tubs get by with a 400 to 700 W blower, while larger tubs and swim spas with a bubble floor across the whole surface need 900 W. Higher output does not only mean a stronger massage but also more noise and higher consumption, so it pays to stay with what the original unit had. The safest approach is to copy the type designation straight from the removed blower - LX APR800, Balboa G90-2NN-S and so on. Heated and regulated versions Some units have built-in air heating, because cold air blown into the tub cools the water; on the Koller range you can recognise this by the letter H in the designation (for example H-3605-2). Models with electronic speed control let you vary the massage intensity smoothly, while simpler versions only switch on and off. Koller also offers a version with central mounting, which fits into the cabinet frame differently from a standard unit - so check the mounting method before ordering, not just the output. What to watch out for The connection diameter must match your existing piping; the sockets are typically 1.25 inch or 48 mm, and plastic reducers and connecting pipes are also on offer. A blower is always installed above the water level of the tub so that water cannot run back into the unit when it is switched off. Wiring is reserved electrical work - switch off the circuit breaker before any intervention and have the work done by a qualified person. You will find control panels and switches in the Electrical & Cables category, and the full overview of parts in the parent category Hot Tub Spare Parts. Who this category is for Hot tub owners whose blower has worn out or whose air massage has weakened, as well as service technicians looking for a specific type including reducers and connecting pipes. The shop is run by IDOL SPAS s.r.o., a Czech hot tub manufacturer with its own service team - if you are unsure what to choose, we will advise you from experience. We offer service companies and dealers a wholesale programme with individual pricing.