Free shipping over €200  ·  Dispatch within 24–48 h Mon–Fri
Categories

Control Systems (Balboa, Gecko)

The control system is the brain of a hot tub: it switches the pumps, heater, blower and lights, and monitors water temperature. This category carries over 500 parts for Balboa and Gecko systems and complete ACC control packs — the brands that run the majority of European hot tubs. What's in stock Balboa VL series control panels (VL600S, VL700S, VL802D) for GS and BP systems — with or without overlay Balboa VX20 and VX40S auxiliary controllers for switching jets, blower and lights directly from the seat Gecko IN.K1000 and IN.K1000+ touch panels including protective covers, IN.K1001 button panels Complete ACC control packs — SmarTouch Digital 1000 and 2000 with integrated 5.5 kW heating, and ePack with 3 kW heating Balboa Plug & Click wiring, sensors, fuses and small parts such as heater nuts How to choose the right panel or pack The control panel must match the control pack, not the hot tub brand. Open the electrical compartment and note the type printed on the base pack — for Balboa this might be GS100 or BP200, for Gecko an IN. series. Choose a panel with the correct connector and function count accordingly: a panel for a single pump plus blower (VL600S) will not work on a system with two pumps — that needs a VL702S. Also watch out for overlays — some panels are sold without one, since the print varies by hot tub configuration. When replacing a complete control pack, check the integrated heater output (3 kW vs. 5.5 kW) against your supply's fuse rating, and the number of pump outputs. A two-speed massage pump needs a pack with a matching output. What to watch out for Error codes on the display (FLO, OH, dr and similar) often don't mean faulty electronics — a clogged filter or a bad flow sensor is a more common cause. Before ordering a new base pack, check the filter cartridge and the connecting cables first; sensors and cables are stocked separately in our electrical parts category. For Balboa GS/BP systems we also stock replacement M7 heaters that connect directly to the pack. For whom For service technicians and hot tub owners who can handle swapping a panel or pack based on its type designation. As a hot tub manufacturer with our own service department, we can help identify your system — just send a photo of the base pack. In-stock items ship within 48 hours across the EU.

  • Brands
  • Reset

Showing 271–300 of 566 results

The control system is the brain of a hot tub: it switches the pumps, heater, blower and lights, and monitors water temperature. This category carries over 500 parts for Balboa and Gecko systems and complete ACC control packs — the brands that run the majority of European hot tubs. What's in stock Balboa VL series control panels (VL600S, VL700S, VL802D) for GS and BP systems — with or without overlay Balboa VX20 and VX40S auxiliary controllers for switching jets, blower and lights directly from the seat Gecko IN.K1000 and IN.K1000+ touch panels including protective covers, IN.K1001 button panels Complete ACC control packs — SmarTouch Digital 1000 and 2000 with integrated 5.5 kW heating, and ePack with 3 kW heating Balboa Plug & Click wiring, sensors, fuses and small parts such as heater nuts How to choose the right panel or pack The control panel must match the control pack, not the hot tub brand. Open the electrical compartment and note the type printed on the base pack — for Balboa this might be GS100 or BP200, for Gecko an IN. series. Choose a panel with the correct connector and function count accordingly: a panel for a single pump plus blower (VL600S) will not work on a system with two pumps — that needs a VL702S. Also watch out for overlays — some panels are sold without one, since the print varies by hot tub configuration. When replacing a complete control pack, check the integrated heater output (3 kW vs. 5.5 kW) against your supply's fuse rating, and the number of pump outputs. A two-speed massage pump needs a pack with a matching output. What to watch out for Error codes on the display (FLO, OH, dr and similar) often don't mean faulty electronics — a clogged filter or a bad flow sensor is a more common cause. Before ordering a new base pack, check the filter cartridge and the connecting cables first; sensors and cables are stocked separately in our electrical parts category. For Balboa GS/BP systems we also stock replacement M7 heaters that connect directly to the pack. For whom For service technicians and hot tub owners who can handle swapping a panel or pack based on its type designation. As a hot tub manufacturer with our own service department, we can help identify your system — just send a photo of the base pack. In-stock items ship within 48 hours across the EU.