EOV-15 heats flowing water in pools and whirlpool tubs with a heating element. You set the temperature with a control thermostat, and the element is switched by a contactor controlled by the thermostat and a safety flow indicator.
Design and materials
- Casing made of stainless steel with titanium content AISI 316
- INCOLOY 800 heating cartridge with titanium content
- Pressure switch monitoring the flow
- 100% leak tested
- 2 brackets for easy mounting
Connection and control
- Connection via 1.5″ thread, 50 mm hose or 50 mm glued joint
- Thermostat 5 °C – 45 °C and thermal fuse
- Power output 15 kW, voltage 400 V
Operating conditions
- Minimum water flow: 4 m³/h (with the pressure switch readjusted from 1,000 l/h)
- Operating pressure: 0–3 bar
- Connection to a circuit with 50 mm pipe diameter
- Water quality: chlorides max. 150 mg/l, chlorine max. 1 mg/l, pH 7.0–7.8
Install downstream of a residual current device; automatic VÁGNER control is recommended. Power outputs up to 36 kW available to order.
Recenze
Zatím zde nejsou žádné recenze.