Free shipping over €200  ·  Dispatch within 24–48 h Mon–Fri
Categories

Badu/Speck Pump Spare Parts

More than 90 items for Badu pool pumps from the German manufacturer Speck – spare parts as well as complete pumps. In-stock parts include impellers, pre-filter baskets, cooling fans, flange collars, drain plugs and their seals, electrical boxes and fasteners for the Badu Magic, Magic II, Top II (Bettar), Prime and Picco series. Alongside them you will find complete Badu Prime, Magna, Picco and Magic pumps, the RESORT high-output series and Badu ECO Drive II frequency inverters. In-stock items ship within 48 hours, and we deliver across the EU. How to find the right part Go by the type designation on the pump's rating plate, not by power output. Impellers differ even within a single series – the Badu Magic 11 has an impeller of 100 × 12.5 mm, while the Top II comes in variants for the Bettar 12 and Bettar 14. The same logic applies to seals and plugs: the Bettar drain plug seal measures 11 × 2.5 mm and no other type will fit. The designations Bettar and Badu Top II overlap in the catalogue because they are the same design series. Complete pumps and outputs The complete pumps cover domestic pools as well as public facilities. The Badu Picco II/5 delivers 5 m³/h at 0.39 kW, the Magic II/8 delivers 8 m³/h, the Prime 11 and 15 handle 11 and 15 m³/h, and the Magna 12 is designed for 12 m³/h at 230 V. The RESORT series goes higher – 30, 40 and 55 m³/h at 230/400 V, or 400/690 V for the largest model. ECO Drive II frequency inverters in 0.75 and 1.5 kW allow smooth speed control, so the pump runs in economy mode for most of the day. What to watch out for Before dismantling, switch off the circuit breaker and close the valves on both the suction and discharge side. The mechanical seal is always replaced as a whole, together with the housing gasket. For three-phase machines, check the power supply – the RESORT series exists in both 230/400 V and 400/690 V versions, and mixing them up means a destroyed motor. Parts for ESPA pumps are listed in Espa Pump Spare Parts, and the full range of pumps in the parent category Pumps. Who this category is for For service technicians and pool managers who keep Badu pumps running, and for owners dealing with a worn impeller or a leaking pre-filter. The shop is run by IDOL SPAS s.r.o., a Czech hot tub manufacturer with its own service team. For service companies and resellers we offer a wholesale programme with individual pricing.

  • Brands
  • Reset

Showing 31–60 of 87 results

More than 90 items for Badu pool pumps from the German manufacturer Speck – spare parts as well as complete pumps. In-stock parts include impellers, pre-filter baskets, cooling fans, flange collars, drain plugs and their seals, electrical boxes and fasteners for the Badu Magic, Magic II, Top II (Bettar), Prime and Picco series. Alongside them you will find complete Badu Prime, Magna, Picco and Magic pumps, the RESORT high-output series and Badu ECO Drive II frequency inverters. In-stock items ship within 48 hours, and we deliver across the EU. How to find the right part Go by the type designation on the pump's rating plate, not by power output. Impellers differ even within a single series – the Badu Magic 11 has an impeller of 100 × 12.5 mm, while the Top II comes in variants for the Bettar 12 and Bettar 14. The same logic applies to seals and plugs: the Bettar drain plug seal measures 11 × 2.5 mm and no other type will fit. The designations Bettar and Badu Top II overlap in the catalogue because they are the same design series. Complete pumps and outputs The complete pumps cover domestic pools as well as public facilities. The Badu Picco II/5 delivers 5 m³/h at 0.39 kW, the Magic II/8 delivers 8 m³/h, the Prime 11 and 15 handle 11 and 15 m³/h, and the Magna 12 is designed for 12 m³/h at 230 V. The RESORT series goes higher – 30, 40 and 55 m³/h at 230/400 V, or 400/690 V for the largest model. ECO Drive II frequency inverters in 0.75 and 1.5 kW allow smooth speed control, so the pump runs in economy mode for most of the day. What to watch out for Before dismantling, switch off the circuit breaker and close the valves on both the suction and discharge side. The mechanical seal is always replaced as a whole, together with the housing gasket. For three-phase machines, check the power supply – the RESORT series exists in both 230/400 V and 400/690 V versions, and mixing them up means a destroyed motor. Parts for ESPA pumps are listed in Espa Pump Spare Parts, and the full range of pumps in the parent category Pumps. Who this category is for For service technicians and pool managers who keep Badu pumps running, and for owners dealing with a worn impeller or a leaking pre-filter. The shop is run by IDOL SPAS s.r.o., a Czech hot tub manufacturer with its own service team. For service companies and resellers we offer a wholesale programme with individual pricing.