Free shipping over €200  ·  Dispatch within 24–48 h Mon–Fri
Categories

Other Pump Spare Parts

More than 400 spare parts for pool and heat pumps of brands that do not have their own subcategory – around sixty impellers, mechanical and ceramic seals, housing and flange gaskets, lids, nuts and pre-filter baskets, capacitors, flange collars and fittings. Parts are available for InverPro, Mr.Master, Mr.Pump ECO, Emaux SS, Victoria, Preva, Kripsol, Waterway, Herborner, Nautilus and HCP pumps of the FD, FDN and Giant series, as well as for Mr.Silence heat pumps. In-stock items ship within 48 hours, and we deliver across the EU. For the two most widespread brands we have separate categories – Badu/Speck Pump Spare Parts and Espa Pump Spare Parts. Besides spare parts there are also complete pumps, from domestic units to machines for public facilities (for example the FDN-15 with a flow of 47 m³/h or the FDN-133HV with 299 m³/h); the full range can be found in the parent category Pumps. How to find the right part The surest way is the type designation on the pump's rating plate, not the power output. Parts are supplied according to the positions in the exploded diagram, so we state either the position (for example the Mr.Master impeller pos. 29) or the dimension directly: the FDN-16 DN15 impeller of 118 × 12.5 mm, the FD-3000 housing gasket of 145 × 3 mm, the 68 × 5 mm O-ring for Badu or the LN flange gasket for the Emaux SS of 49 × 3.5 mm. For series that changed over time, also check the variant – the InverPro pre-filter lid, nut and key exist in an old and a new type and are not interchangeable. What to watch out for The seal is always replaced as a whole, meaning both the rotating and the stationary part, together with the housing gasket; the ceramic surfaces must not be touched with greasy hands during installation. The impeller must match the specific output, not just the pump type – within one series they differ in dimension and designation (Waterway 5HP, Magic 8 d100 × 10, Badu Prime 13, Tiper2 125). Choose electrical parts – capacitors, pressure sensors, displays or low-pressure protection switches for heat pumps – by model and voltage, not by appearance. For complete pumps, verify the power supply: both the FDN and Badu series come in 230 V, 400 V and 400/690 V versions. Who this category is for For service technicians, pool managers and owners whose pump leaks at the seal or has lost flow because of a worn impeller. The shop is run by IDOL SPAS s.r.o., a Czech hot tub manufacturer with its own service team – if you are unsure of the type designation, we will advise you from practical experience. For service companies and resellers we offer a wholesale programme with individual pricing.

  • Brands
  • Reset

Showing 181–210 of 235 results

More than 400 spare parts for pool and heat pumps of brands that do not have their own subcategory – around sixty impellers, mechanical and ceramic seals, housing and flange gaskets, lids, nuts and pre-filter baskets, capacitors, flange collars and fittings. Parts are available for InverPro, Mr.Master, Mr.Pump ECO, Emaux SS, Victoria, Preva, Kripsol, Waterway, Herborner, Nautilus and HCP pumps of the FD, FDN and Giant series, as well as for Mr.Silence heat pumps. In-stock items ship within 48 hours, and we deliver across the EU. For the two most widespread brands we have separate categories – Badu/Speck Pump Spare Parts and Espa Pump Spare Parts. Besides spare parts there are also complete pumps, from domestic units to machines for public facilities (for example the FDN-15 with a flow of 47 m³/h or the FDN-133HV with 299 m³/h); the full range can be found in the parent category Pumps. How to find the right part The surest way is the type designation on the pump's rating plate, not the power output. Parts are supplied according to the positions in the exploded diagram, so we state either the position (for example the Mr.Master impeller pos. 29) or the dimension directly: the FDN-16 DN15 impeller of 118 × 12.5 mm, the FD-3000 housing gasket of 145 × 3 mm, the 68 × 5 mm O-ring for Badu or the LN flange gasket for the Emaux SS of 49 × 3.5 mm. For series that changed over time, also check the variant – the InverPro pre-filter lid, nut and key exist in an old and a new type and are not interchangeable. What to watch out for The seal is always replaced as a whole, meaning both the rotating and the stationary part, together with the housing gasket; the ceramic surfaces must not be touched with greasy hands during installation. The impeller must match the specific output, not just the pump type – within one series they differ in dimension and designation (Waterway 5HP, Magic 8 d100 × 10, Badu Prime 13, Tiper2 125). Choose electrical parts – capacitors, pressure sensors, displays or low-pressure protection switches for heat pumps – by model and voltage, not by appearance. For complete pumps, verify the power supply: both the FDN and Badu series come in 230 V, 400 V and 400/690 V versions. Who this category is for For service technicians, pool managers and owners whose pump leaks at the seal or has lost flow because of a worn impeller. The shop is run by IDOL SPAS s.r.o., a Czech hot tub manufacturer with its own service team – if you are unsure of the type designation, we will advise you from practical experience. For service companies and resellers we offer a wholesale programme with individual pricing.