Free shipping over €200  ·  Dispatch within 24–48 h Mon–Fri

Filter Tank Spare Parts

Filter Tank Spare Parts is a service category with more than 170 spare parts for sand and cartridge filters. We keep in stock gaskets, transparent and solid lids, collectors and collector arms, filter crosses, oil-filled pressure gauges, six-way valves and their internal components, for tanks from Emaux (TOP, TOP VF, MFS, SMG), Praher QS, Astral Cantabric, Hayward, Kripsol, Bilbao, PTK, San Sebastian, Granada, Vienna, Volcano and Plimat. In-stock items ship within 48 hours, and we deliver across the EU. How it differs from the Filter Tanks category The parent category Filter Tanks contains complete products – whole sand tanks and filter units of the TOP, TOP VF, Cantabric, Bilbao, Artic, SMG, QS, Lisboa and BARENT series or the large-volume Hayward HCF FB, as well as C5, C6 and C7 cartridge filters. Here in the spare parts category you will find the individual components used to repair an existing tank without replacing it entirely. If you are looking for a new tank, go one level up; if you are dealing with a leaking lid, a cracked collector arm or a leaking six-way valve, you are in the right place. There are also a few stand-alone tanks without accessories (TOP 350, 450 and 500) and Granada 400 and 500 Top units. What you'll find in this category The largest group consists of sealing elements: toroidal and concave gaskets, O-rings (for example EPDM 47 × 5.33 mm or toroidal 170 × 5.75 mm), gaskets under lids, under six-way valves and under the connections of SMG 500/650 and SMG 750/900 tanks. The second large group is distribution parts – collector bodies, centre pipes with a distributor for the TOP 350 to 500, QS 400, 500 and 600 filter crosses and collector arms in lengths of 100, 110, 115, 126, 160, 170, 185, 225, 233, 420 and 540 mm with a 0.3 mm slot and a 3/4″ or 1″ connection. In stock you will also find clamping nuts and flange collars, stainless steel clamps and QS centre rings, M8 × 100 and M8 × 120 mm tightening screws for clamps, drain valves and plugs, pressure gauges with a T-piece, MPUZ valve hand levers (d63/75/90 up to d160) and bottom and top parts of QS 400–600 and Bilbao d350–d600 tanks. How to choose the right part The type and diameter of the tank are decisive, not the brand of the pump. You will find the designation on the tank's rating plate or directly on the lid – for example QS 500, TOP 450, Cantabric d750, SMG 650 or Bilbao d400. For collector arms, measure both the length and the thread; for gaskets, the inner diameter and cross-section; for pressure gauges, the connection type (stand-alone or with a T-piece). With every replacement, release the pressure first and check the sealing surface; a damaged lid rim is a common cause of repeated leaks. Filter sand and media are covered by Filter Media, and complete tank-and-pump sets can be found under Filter Kit (tank + pump). Who this category is for The category is for pool owners who want to repair their existing filtration instead of replacing the entire tank, and for service technicians who need common wear parts quickly and in proven quality. It will also serve operators of public pools, where gaskets and collectors are replaced regularly. The shop is run by IDOL SPAS s.r.o., a Czech hot tub manufacturer with its own service team – if you are unsure about your choice, we will advise you from practical experience. For service companies and resellers we offer a wholesale programme with individual pricing.

  • Brands
  • Reset

Showing 1–30 of 133 results

Filter Tank Spare Parts is a service category with more than 170 spare parts for sand and cartridge filters. We keep in stock gaskets, transparent and solid lids, collectors and collector arms, filter crosses, oil-filled pressure gauges, six-way valves and their internal components, for tanks from Emaux (TOP, TOP VF, MFS, SMG), Praher QS, Astral Cantabric, Hayward, Kripsol, Bilbao, PTK, San Sebastian, Granada, Vienna, Volcano and Plimat. In-stock items ship within 48 hours, and we deliver across the EU. How it differs from the Filter Tanks category The parent category Filter Tanks contains complete products – whole sand tanks and filter units of the TOP, TOP VF, Cantabric, Bilbao, Artic, SMG, QS, Lisboa and BARENT series or the large-volume Hayward HCF FB, as well as C5, C6 and C7 cartridge filters. Here in the spare parts category you will find the individual components used to repair an existing tank without replacing it entirely. If you are looking for a new tank, go one level up; if you are dealing with a leaking lid, a cracked collector arm or a leaking six-way valve, you are in the right place. There are also a few stand-alone tanks without accessories (TOP 350, 450 and 500) and Granada 400 and 500 Top units. What you'll find in this category The largest group consists of sealing elements: toroidal and concave gaskets, O-rings (for example EPDM 47 × 5.33 mm or toroidal 170 × 5.75 mm), gaskets under lids, under six-way valves and under the connections of SMG 500/650 and SMG 750/900 tanks. The second large group is distribution parts – collector bodies, centre pipes with a distributor for the TOP 350 to 500, QS 400, 500 and 600 filter crosses and collector arms in lengths of 100, 110, 115, 126, 160, 170, 185, 225, 233, 420 and 540 mm with a 0.3 mm slot and a 3/4″ or 1″ connection. In stock you will also find clamping nuts and flange collars, stainless steel clamps and QS centre rings, M8 × 100 and M8 × 120 mm tightening screws for clamps, drain valves and plugs, pressure gauges with a T-piece, MPUZ valve hand levers (d63/75/90 up to d160) and bottom and top parts of QS 400–600 and Bilbao d350–d600 tanks. How to choose the right part The type and diameter of the tank are decisive, not the brand of the pump. You will find the designation on the tank's rating plate or directly on the lid – for example QS 500, TOP 450, Cantabric d750, SMG 650 or Bilbao d400. For collector arms, measure both the length and the thread; for gaskets, the inner diameter and cross-section; for pressure gauges, the connection type (stand-alone or with a T-piece). With every replacement, release the pressure first and check the sealing surface; a damaged lid rim is a common cause of repeated leaks. Filter sand and media are covered by Filter Media, and complete tank-and-pump sets can be found under Filter Kit (tank + pump). Who this category is for The category is for pool owners who want to repair their existing filtration instead of replacing the entire tank, and for service technicians who need common wear parts quickly and in proven quality. It will also serve operators of public pools, where gaskets and collectors are replaced regularly. The shop is run by IDOL SPAS s.r.o., a Czech hot tub manufacturer with its own service team – if you are unsure about your choice, we will advise you from practical experience. For service companies and resellers we offer a wholesale programme with individual pricing.