Free shipping over €200  ·  Dispatch within 24–48 h Mon–Fri

Hydromassage Systems

Over 60 components for hydromassage and air massage built right into the pool – massage and micro jets, rotating jets, hydromassage beds, floor bubble systems, stainless-steel air massage covers and the centrifugal pumps that drive the whole circuit. In stock you will find parts from Hugo Lahme, VA systems and pumps from the EVOLUX and CALA ranges. In-stock items ship within 48 hours, and we deliver across the EU. Hydromassage or air massage Hydromassage drives water through jets under pressure and creates a targeted stream – this is what the ABS micro jets with a 12 mm opening (in white and chrome), the rotating jets and the AISI 304 steel hydromassage beds for concrete are made for. Air massage blows air into the water and feels gentler: this covers floor bubble systems with built-in parts, the 300 mm circular floor massage in AISI 316L steel and stainless-steel cover strips, including a version with an integrated 50 W light. Sizing the pump The massage circuit is separate and must never be mixed with the filtration. The pump is chosen according to the number and type of jets – the EVOLUX 1500 centrifugal pump delivers 25.5 m³/h at 0.9 kW, and the CALA series is available in single-phase and three-phase versions. An undersized pump means a weak flow at the last jets in the line; an oversized one hums and consumes more than necessary. Keep in mind that air massage needs its own blower, not a pump. What to watch out for Most parts are installed during the rough-construction stage, so the decision has to be made before the pool is welded or concreted – retrofitting means cutting into the wall. For stainless-steel parts, choose AISI 316L rather than 304 for salt and salt-electrolysis water. Match the material and the colour of the faceplates with the other fittings; white, chrome and light grey versions are available for prefabricated pools. You will find water features such as counter-current units and water spouts in the parent category Water Features. Who the category is for For designers and construction companies planning hydromassage for a new pool, as well as owners and service technicians replacing worn jets, rotating parts or covers. The shop is run by IDOL SPAS s.r.o., a Czech hot tub manufacturer with its own service team – if you are unsure about your choice, we will advise you from experience. For service companies and resellers we offer a wholesale programme with individual prices.

  • Brands
  • Reset

Showing 1–30 of 62 results

Over 60 components for hydromassage and air massage built right into the pool – massage and micro jets, rotating jets, hydromassage beds, floor bubble systems, stainless-steel air massage covers and the centrifugal pumps that drive the whole circuit. In stock you will find parts from Hugo Lahme, VA systems and pumps from the EVOLUX and CALA ranges. In-stock items ship within 48 hours, and we deliver across the EU. Hydromassage or air massage Hydromassage drives water through jets under pressure and creates a targeted stream – this is what the ABS micro jets with a 12 mm opening (in white and chrome), the rotating jets and the AISI 304 steel hydromassage beds for concrete are made for. Air massage blows air into the water and feels gentler: this covers floor bubble systems with built-in parts, the 300 mm circular floor massage in AISI 316L steel and stainless-steel cover strips, including a version with an integrated 50 W light. Sizing the pump The massage circuit is separate and must never be mixed with the filtration. The pump is chosen according to the number and type of jets – the EVOLUX 1500 centrifugal pump delivers 25.5 m³/h at 0.9 kW, and the CALA series is available in single-phase and three-phase versions. An undersized pump means a weak flow at the last jets in the line; an oversized one hums and consumes more than necessary. Keep in mind that air massage needs its own blower, not a pump. What to watch out for Most parts are installed during the rough-construction stage, so the decision has to be made before the pool is welded or concreted – retrofitting means cutting into the wall. For stainless-steel parts, choose AISI 316L rather than 304 for salt and salt-electrolysis water. Match the material and the colour of the faceplates with the other fittings; white, chrome and light grey versions are available for prefabricated pools. You will find water features such as counter-current units and water spouts in the parent category Water Features. Who the category is for For designers and construction companies planning hydromassage for a new pool, as well as owners and service technicians replacing worn jets, rotating parts or covers. The shop is run by IDOL SPAS s.r.o., a Czech hot tub manufacturer with its own service team – if you are unsure about your choice, we will advise you from experience. For service companies and resellers we offer a wholesale programme with individual prices.