Free shipping over €200  ·  Dispatch within 24–48 h Mon–Fri
Categories

Flanged Connections

Over 70 parts for detachable flanged joints in pool pipework – loose PVC flanges, stub flanges (flat type and DN version), EPDM gaskets for the stub flanges, and stainless steel and plastic flanges for skimmers, lights, filter tanks and counter-current units. Dimensions range from d25 to DN200 and the bolt spacing matches common types of six-way valves. In-stock items ship within 48 hours, with shipping across the EU. What a joint consists of A flanged joint has three parts: a stub flange solvent-welded to the pipe, a loose flange slipped over it, and a gasket between two stub flanges. You therefore need to order all three – a flange without a stub flange connects nothing. We list the gaskets in EPDM in the same range of dimensions as the stub flanges (d32, d50, d63, d90, d200 and more), so you can find the matching set for your pipe profile. Flanges for built-in parts The second group is flanges that are not related to the pipework but to installation in the pool wall: flanges for skimmers (for example Kripsol 20 × 18 cm or stainless steel AISI 316 for models 11311 and 11313), the MTS SSL300 light flange, the PTK filter wall flange with gasket, and flanges for A-JET, V-JET and Oval counter-current units. These parts are tied to a specific model, not to a dimension – choose according to manufacturer and type of installation. What to watch out for With six-way valves, check the bolt-hole spacing, not just the nominal dimension; the flange for the Praher E valve has a spacing of 203 mm and will not bolt together with any other spacing. Do not overtighten bolts and nuts, and tighten in a cross pattern so the flange does not distort – PVC is rigid but brittle. In salt and saline-treated water, choose AISI 316 stainless steel for metal parts. You will find solvent-weld and threaded joints in the PVC-U Valves & Fittings category and built-in parts in the Jets & Outlets section. Who this category is for For pool builders and installation companies building a technical shaft and needing joints that can be dismantled later, and for service technicians replacing gaskets on an existing pipework. The e-shop is run by IDOL SPAS s.r.o., a Czech hot tub manufacturer with its own service team – if you are unsure about your choice, we will advise from hands-on experience. We offer service companies and resellers a wholesale programme with individual pricing.

  • Brands
  • Reset

Showing 31–59 of 59 results

Over 70 parts for detachable flanged joints in pool pipework – loose PVC flanges, stub flanges (flat type and DN version), EPDM gaskets for the stub flanges, and stainless steel and plastic flanges for skimmers, lights, filter tanks and counter-current units. Dimensions range from d25 to DN200 and the bolt spacing matches common types of six-way valves. In-stock items ship within 48 hours, with shipping across the EU. What a joint consists of A flanged joint has three parts: a stub flange solvent-welded to the pipe, a loose flange slipped over it, and a gasket between two stub flanges. You therefore need to order all three – a flange without a stub flange connects nothing. We list the gaskets in EPDM in the same range of dimensions as the stub flanges (d32, d50, d63, d90, d200 and more), so you can find the matching set for your pipe profile. Flanges for built-in parts The second group is flanges that are not related to the pipework but to installation in the pool wall: flanges for skimmers (for example Kripsol 20 × 18 cm or stainless steel AISI 316 for models 11311 and 11313), the MTS SSL300 light flange, the PTK filter wall flange with gasket, and flanges for A-JET, V-JET and Oval counter-current units. These parts are tied to a specific model, not to a dimension – choose according to manufacturer and type of installation. What to watch out for With six-way valves, check the bolt-hole spacing, not just the nominal dimension; the flange for the Praher E valve has a spacing of 203 mm and will not bolt together with any other spacing. Do not overtighten bolts and nuts, and tighten in a cross pattern so the flange does not distort – PVC is rigid but brittle. In salt and saline-treated water, choose AISI 316 stainless steel for metal parts. You will find solvent-weld and threaded joints in the PVC-U Valves & Fittings category and built-in parts in the Jets & Outlets section. Who this category is for For pool builders and installation companies building a technical shaft and needing joints that can be dismantled later, and for service technicians replacing gaskets on an existing pipework. The e-shop is run by IDOL SPAS s.r.o., a Czech hot tub manufacturer with its own service team – if you are unsure about your choice, we will advise from hands-on experience. We offer service companies and resellers a wholesale programme with individual pricing.